Publicité
Pic. 28
To remove spiral blade put fingers on the plate part of the spiral and pull it onwards
gently as shown in Pict. 28 & 29.
Pic. 30
Once the spiral blade is removed
completely remove the suction cap
gasket from the front spiral as shown in
Pict. 30
ATTENTION: Place all the components in a safe place in order to be sure they
are not lost.
Clean the components with household bleach and tepid water. Never use abrasive
cleaners.
NOTE: Do not use too hot water to clean the plastic components .
CLEANING OPERATION
Pic. 29
Pic. 31
Remove bowl gasket from the back part
of the evaporator tube (see Pict. 31).
14
Publicité
