Velleman INHA568 Notice D'emploi page 4

Les langues disponibles

• If any faults or abnormalities are observed, do not use this device and let it check by authorised personel.

• Never use the meter unless the back cover is in place and fastened fully.

• To clean the meter, use a damp cloth and mild detergent only, do not use abrasives or solvents.

2. Description of the front panel

1. Display

2. Range Control Button

3. Data Hold button

4. AC/DC Current of

Selecting Button

5. Socket for Transistor Test

6. Function Switch/Power Switch

7. V/Ω/F Input Jack

8. COM Input Jack

9. mA/Cx Input Jack

10. 10A Input Jack

2.1 Range Control Button

Range for AC/DC voltage, AC/DC current(µ A and mA only), Resistance and Frequency measuring can be selected

manually or autorange. Push this button as following to choose range the desired mode or range.

Push button

for over

3 sec.

2.2 DATA HOLD button

When this button is pushed, the display will show the last reading and " D-H " symbol will appear until the button is

pushed again.

Data holding will be cancelled automatically when the function switch is rotated.

DVM68

Power On or Function Changing

AutoRanging

Manual Ranging

Range Changed

- 4 -

Push button once

"R-H"displayed

Push button for

less than 1 sec.

VELLEMAN

Dvm68