Haier HW90-B1239N Manuel D'utilisation page 9

EN
3.4 Detergent drawer
Open the drawer, three compartments can be seen
(Fig. 3-4):
Compartment 1 : Water inlet only, no detergent
Compartment 2 : Detergent for programme
Compartment : Softener, Conditioning agent etc.
The recommendation on the type of detergents is suit-
able for the various washing temperatures, please refer
to the manual of detergent.
 )XQFWLRQ EXWWRQV
The function buttons (Fig. 3-5 ) enables additional op-
tions in the selected programme before programme
start. The related indicators are displayed.
%\ VZLWFKLQJ R WKH DSSOLDQFH RU VHWWLQJ D QHZ SUR-
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete the setting or to cancel the setting process,
press the function button until the desired LED lights or
LQ FDVH RI RQO\ RQH RSWLRQ WKH /(' VZLWFKHV R 
Note: Factory settings
7R JHW EHVW UHVXOWV LQ HDFK SURJUDPPH +DLHU KDV ZHOO GH QHG VSHFL F GHIDXOW VHWWLQJV
If there is no special requirement default settings are recommended.
)XQFWLRQ EXWWRQ 7HPS
Press this button (Fig. 3-5-1) to change the washing
temperature of the programme. If no value is illuminat-
ed the water will not be heated.
In conjunction with the "Steam" button, the child lock
IXQFWLRQ FDQ EH VZLWFK RQR VHH &+,/' /2&. 
3.5.2-FunctioQ EXWWRQ 6SHHG
Press this button (Fig. 3-5-2) to change or deselect the
spin of the programme. If no value is illuminated the
laundry will not spun.
)XQFWLRQ EXWWRQ 6WHDP
Press this button (Fig. 3-5-3) to activate the steam function.
When this function is activated the default temperature is the maxi-
mum temperature of the programme selected.
This function can be activated only with the following programmes:
Hygiene, BabyCare, Mix, Synthetic, Cotton.
When the function is activated the led above the button will light up.
Pushing again this button the function can be deactivated and the led above the
button ZLOO WXUQ R 
3-Control panel
3-5-1
3-4
3-5
3-5-2
3-5-3
9