Sharp KF-56FVDD22WM-CH Guide D'utilisation page 27

A cooking period between the
time range of 0 and 10 hours
can be set.
A
En d
-
MODE
Second, keep pressing the MODE
button until you see "end" on the timer
screen. When you see "end" on the
timer screen, the symbol (A) and the
cooking end time begin to flash. Adjust
the finishing time for the food by using
the (+) and (-) keys while the timer is
in this position. Some time after the
adjustment operation is completed, the
day's current time will appear on the
screen and the symbol (A) will begin to
light continuously on the screen.
You can set a time which can
be up 23.59 hours after the
time obtained by adding the
cooking period and the current
time.
The oven will start operating at the
time calculated by deducting the
cooking period from the set finishing
time, and will stop at the set finishing
time. The timer will give an audible
warning and the symbol (A) will begin
to flash. After bringing the oven button
and oven thermostat button to the 0
position, pressing any button of the
timer will end the audible warning.
Also, current time will be displayed on
timer.
Key Lock:
• The mode button needs to be pres-
• After activation of the mode button,
+
EN - 20
sed for at least 2 seconds, if none of
the buttons are activated within last 5
seconds.
each button is activated immediately
as they are pressed.