Set Up Instructions; Features; Charging - Napa Blue-Fuel 85-912 Guide D'utilisation

2.6 This product contains a lithium ion battery. In case of fire, you may use water, a
foam extinguisher, Halon, CO
or soda (sodium carbonate) to extinguish the fire. Once the fire is extinguished, douse
the product with water, an aqueous-based extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the battery from re-igniting. NEVER attempt to
pick up or move a hot, smoking, or burning product, as you may be injured.
2.7 WARNING: This product contains one or more chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm.
3.

SET UP INSTRUCTIONS

3.1 Remove any cord wraps and uncoil the charging cable.
4.

FEATURES

2
1
5.

CHARGING

IMPORTANT! CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS. Failure to do this will
reduce the battery's capacity and may void the warranty.
5.1 Rotate the sleeve, to expose the micro USB charging port. Connect the micro
USB end of the charging cable to the micro USB port on the work light. Insert the
USB end of the cable into the USB port on your charger. Plug your charger into a
live power source.
5.2 The charging LED will light RED, to indicate charging has begun.
5.3 When the battery is fully charged, the charging LED will change to GREEN.
5.4 Recharge the work light after use, and at least every 6 months.
, ABC dry chemical, powdered graphite, copper powder
2
4
3
6
5
1. 10W CREE LED
2. Rotating barrel
3. Charging port
4. Rotating sleeve
5.
6. USB/Micro USB charging cable
• 6 •
for focus function
ON/OFF power button