Set Up Instructions - Napa Blue-Fuel 85-956 Guide D'utilisation

2.6 This product contains a lithium ion battery. In case of fire, you may use water, a
foam extinguisher, Halon, CO
or soda (sodium carbonate) to extinguish the fire. Once the fire is extinguished, douse
the product with water, an aqueous-based extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the battery from re-igniting. NEVER attempt to
pick up or move a hot, smoking, or burning product, as you may be injured.
3.

SET UP INSTRUCTIONS

3.1 Remove any cord wraps and uncoil the charging cable.
4. FEATURES
2
1
5. CHARGING
IMPORTANT! CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS. Failure to do this will
reduce the battery's capacity and may void the warranty.
5.1 Rotate the sleeve, to expose the micro USB charging port. Connect the micro
USB end of the charging cable to the micro USB port on the work light. Insert the
USB end of the cable into the USB port on your charger. Plug your charger into a
live power source.
5.2 The green LED will flash, to indicate charging has begun.
5.3 When the green LED is steady, the battery is fully charged.
5.4 Recharge the work light after use, and at least every 6 months.
, ABC dry chemical, powdered graphite, copper powder
2
4
3
7 6
1. Cree
2. Sliding barrel
5
3.
4. Rotating sleeve
5. Charging port
6. Charging status indicator
7. Micro-USB charging cable
Cree is a registered trademark of Cree, Inc.
®
• 3 •
LED
®
for focus function
ON/OFF power button
for charging port access