Publicité
VENTING YOUR PELLET STOVE INTO AN
EXISTING CLASS A 6" CHIMNEY SYSTEM
IMPORTANT:
If you are installing your pellet stove as a replacement
to an existing wood stove, you can install your pellet
stove using the existing class A 6" venting system.
1.
You must have the existing chimney system cleaned
and/ or inspected by a qualified chimney sweep
before proceeding with the installation of your pellet
stove.
2. To the right is an example of an installation using part
number 860001, 3-6" transition into 6" connector
pipe. the illustration is only
conform to any local building codes or regulations
having jurisdiction before you have a qualified
installer proceed with this installation.
© 2022 United States Stove Company
an example. Please
10
INSTALLATION
Publicité
