Panasonic LUMIX DMW-FL360L Manuel D'utilisation page 11

Control panel display
[ SL AUTO]
[ SL MANUAL]
Button Functions
Button
Adjust flash level by up to w5 EV.
This value is combined with
[ ] adjustments to flash
compensation made using the
camera.
Adjust the lighting angle manually.
[ZOOM]
[M] appears in the display.
Manually turn the LED light on or
[ ]
off.
[TEST/ To fire a test flash, press the [TEST/CHARGE] button while the [TEST/
CHARGE] CHARGE] lamp is lit.
[BACK The control panel backlight lights for about 15 seconds.
LIGHT]
Control operation
The flash can be fired remotely in sync with any
flash fired by other units.
[SL AUTO]: Flash level is set automatically.
[SL MANUAL]: The flash fires at the selected guide
number.
Function Use
1
Press [ ] (2) or [ZOOM]
(4).
2
Rotate the dial to select the
value, and then press the
[OK] button.
1
Before shooting, set the
LED light to [M].
"Other Settings" (P13)
2
Press [ ] (1) to turn the
LED light on. Press [
again to turn the LED light
off. To view the LED
brightness setting, press
and hold [ ] (1) for 2
seconds while the LED light
is on.
(ENG) VQT4Q07
] (1)
11