Publicité
Les langues disponibles
Les langues disponibles
English
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Staple capacity
Air consumption
STAPLE SELECTION
● Be sure to use only the genuine metabo HPT staples for the N5008AC2, N5010A. The use of any other
staples can result in tool malfunction and/or staple breakdown, leading to serious injuries.
Only staples shown in the Table below can be driven with this Stapler.
16 Gauge 7/16" Crown staple
16 Gauge 1/2" Crown staple
10
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
(365 mm × 258 mm × 76 mm)
WARNING
Dimensions of staples for N5008AC2
Min.
.057"
.309"
(1.45 mm)
(7.9 mm)
Dimensions of staples for N5010A
Min.
.052"
.386"
(1.33 mm)
(9.8 mm)
14-3/8" × 10-5/32" × 3"
4.4 lbs. (2.0 kg)
150 Staples
.040 ft
/cycle at 100 psi
3
(1.1 ltr/cycle at 6.9 bar)
(1.1 ltr/cycle at 7 kgf/cm
)
2
)
2
Max.
Max.
Publicité
