MSI B460M PRO Mode D'emploi page 7

Rear I/O Panel
USB 2.0 Type-A
PS/2 Mouse/
Keyboard
LAN Port LED Status Table
Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Realtek HD Audio Manager > Advanced Settings to open the dialog
below.
2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
VGA
DVI-D
USB 3.2 Gen 1
5Gbps Type-A
Speed LED
Status Description
Off 10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection
Line-in
LAN
Mic-in
Line-out
Rear I/O Panel
7