emerio AC-125507 Mode D'emploi page 8

CLEANING AND MAINTENANCE
Unplug the appliance during filling and cleaning.
Make sure there is no water on the control panel.
◼ Clean the air filter and cooling pad
1. Loosen and take off the screws on the air filter.
2. Pull the tab (A) to take off the air filter (B) and the cooling pad (C).
3. Use a neutral cleaner and a soft brush to clean the air filter and the cooling pad. Rinse with clear water
thoroughly.
4. Put back the cooling pad and air filter in place after cleaning. If you will not use the appliance immediately
after cleaning, please dry them before putting back.
Important: in order to avoid leak, the cooling pad must be installed smoothly.
Note: After long time operation, the cooling pad becomes clogged with dust and dirt, which will greatly affect
the performance of the appliance. It is recommended to clean the cooling pad frequently. If the cooling pad
gets worn out, please replace it by a new one, available at www.buyspareparts.eu
◼ Clean the water tank (The water pump is fixed by screws in the water tank. Under normal operation, there
is no need to detach it from the water tank.)
1. Pull out the water tank.
2. Clean the water tank with a soft cloth and a little mild detergent, then clean it with clear water.
3. Put back the water tank in place after cleaning.
Note: After some time of operation, the water tank may have dust and dirt. It is recommended to change
water and clean the water tank frequently.
◼ Clean the main body
1. For slight dirt, wipe if off with a soft damp cloth. For greasy dirt, squeeze a little mild detergent on a soft
damp cloth, then wipe the dirt off.
2. Let the main body dry completely before next use.
TECHNICAL DATA
Mains voltage: 220-240V ~ 50-60Hz
Power consumption: 75W
- 7 -