Publicité
Les langues disponibles
Les langues disponibles
DESCRIPTION
A Grinder lid
B Power button
C Motor base
INTRODUCTION
By purchasing whole beans and storing them properly at home you can maximize the potential
flavor of your home brewed coffee. Grinding your coffee beans just prior to brewing is a critical
step in producing great tasting coffee at home.
The T-fal GT203 grinder is designed to quickly grind coffee beans and dispense them easily into
your coffee filter for brewing.
OPERATION
• Place the unit on a sturdy countertop.
• Fill the grinding chamber with the amount of coffee needed for the number of cups you plan to
brew.
• T-fal recommends 7 grams of ground coffee per 5 oz cup. The whole beans can be measured
with a standard coffee scoop or 1 tablespoon measure. Use one heaping teaspoon per 5 oz cup
of water.
• Place the lid (a) on the grinder base.
• Plug in the grinder. To start grinding, press the power button (fig.2).
• The power will only stay on as long as the button is pressed.
• The coffee will be ground fine or coarse depending on the amount of grinding time. For example,
a coarse grind would require less grinding time than a fine grind.
• When grinding is complete, unplug the unit. Carefully remove the lid and pour the ground coffee
into a bowl or canister, or directly into your coffee machine filter basket.
Caution
Wait until the blades have completely stopped before removing lid. The grinder should be
unplugged before removing the lid.
CLEANING
Keeping your grinder clean is essential to achieve optimal taste results. Coffee beans contain oils
that will collect in the grinder and quickly become stale. The stale oils can contribute unwanted
flavors to your brewed coffee. It is best to clean the unit regularly.
Be sure that grinder is unplugged before cleaning!
• Remove all coffee grounds after each use. A small soft brush or cloth is helpful in removing
ground coffee from lid and blades.
• Wipe inside of grinder lid and blades very carefully with a damp cloth.
• Base unit can be wiped down with a damp cloth. NEVER immerse base unit in water or any other
liquid!
• Lid can be washed in warm water, using a mild detergent, or be placed in the top rack of the
dishwasher and used on gentle cycle.
EN
5
Publicité
