Publicité
Les langues disponibles
Les langues disponibles
Daily Reference Guide
PROGRAMS TABLE
Programs description
Eco 50°- program is suitable to clean normally soiled table-
ware, that for this use, it is the most efficient program in
terms of its combined energy and water consumption, and
that it is used to assess compliance with the EU Ecodesign
legislation.
Auto Intensive 65° - Automatic
program for heavily soiled dishes and
pans.
Auto Mixed 55° - Automatic program
for normally soiled dishes with dried
food residues.
-
Auto Fast 50°
Automatic program for
normally and lightly soiled dishes. The
everyday cycle that ensures optimal
cleaning and drying performance in
shorter time.
Rapid 45° - Program is recommended for limited amount of
lightly-soiled dishes with no dried food residues. Does not
include the drying phase.
Glass 45° - Program for delicate items, which are more sensitive
to high temperatures, for example glasses and cups.
Prewash - Use to refresh crockery planned to be washed
later. No detergent is to be used with this program.
Self-Clean 65° - Program to be used to perform mainte-
nance of the dishwasher and water management system,
to be carried out only when the dishwasher is EMPTY using
specific detergents designed for dishwasher maintenance.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration by up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up) (see
CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will
sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
POWERCLEAN PRO - Thanks to the additional power jets this option
provides a more intensive and powerful wash in the lower rack, in the
specific area. This option is recommended for washing pots and casseroles
(Please refer to the PowerClean Pro loading section).
HALF LOAD - If there are not many dishes to be washed, HALF LOAD is
used to save water, electricity or time, depending on the selected program.
Remember to halve the amount of detergent.
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase allow improved drying.
SILENT - Suitable for night-time operation of the appliance. This option
can be used to limit noise emission during wash phases. It will increase
cycle time depending on base cycle selection.
SANI RINSE - This option can be used to sanitize washed dishes. It will
increase the final rinse temperature and add antibacterial wash to the
selected program. Ideal to clean crockery and feeding bottles. The dishwasher
door must be kept shut for the entire duration of the program in order to
guarantee reduction of germs.
WARNING: the crockery and plates could be extremely hot at the end
of the cycle.
TURBO - Thanks to the Turbo option you can reduce time up to 40%
depending on the selected based program. Energy and water
consumption are increased.
-
DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
2. Press the START/Pause button and close the door within 4 sec. the timer
will begin counting down.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
WATER TAP CLOSED – Alarm - Flashes when there is no inlet water or
water tap is closed.
Senses the level of
soiling on the dishes
and adjusts the
program according-
ly. When the sensor
is detecting the soil
level an animation
appears in the
display and the cycle
duration is updated.
-
-
-
-
Available
options
*)
TIME ON THE FLOOR - A LED light projected on the floor indicates the
time left to the end of the cycle. The light goes off every time the door
is opened. The light goes off at the end of a cycle.This feature is active
by default, but it is possible to deactivate it in the "SETTINGS MENU".
NaturalDry - It is a convection drying system which automatically opens the
door during/after drying phase to ensure exceptional drying performance
every day. Door opens at the temperature that is safe to your kitchen furni-
ture, thus door will not be opened when the option of SANI RINSE is on. As
additional steam protection, special designed protection foil is added to-
gether with the dishwasher.
To see how to mount protection foil please refer to the INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in
the "SETTINGS MENU".
INTERNAL LIGHTS - When the feature is active the LEDs in the tub are
automatically switched on/off as soon as the user open/close the door
respectively. If the door remains opened for more than 10 min, the LEDs in the
tub switch off (to turn them on again, the door has to be closed and opened
again). This feature is active by default, but it is possible to deactivate it in
the "SETTINGS MENU".
DESCALE – Alarm - Limescale accumulation was detected on the
internal components of the appliance. Check if the Water Hardness
Setting is at the correct value and salt is present in the salt container (see
FIRST TIME USE), then use a descaling product (WPro brand is recommended)
with Self-Clean program. After a successful descaling, the icon will stop
being displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display)
and then will be BLOCKED to prevent component damage, with only
the Self-Clean program available. Performing a full descaling will unblock
the product. In the case of extremely high amounts of limescale, descaling
may have to be performed twice to be efficient.
SENSING - When the sensor is detecting the soil level an
animation appears in the display (around 20 min.) and the cycle
duration is updated. SENSING is for the level of soiling on the dishes and is
present for all cycles (excepting Eco) adjusting the program accordingly.
Water
Energy
Duration
con-
con-
of wash
program
sumption
sumption
(h: min)
**)
(litres/cycle)
(kWh/cycle)
4:30
9.5
0.55
2:25 - 3:10
15.5 - 24.5
1.30 - 1.70
1:20 - 3:00
7.5 - 19.5
0.75 - 1.20
1:00 - 1:50
7.5 - 15.5
0.70 - 1.10
0:30 - 0:40
10.0 - 12.0
0.55 - 0.65
1:40 - 1:50
12.5 - 16.5
0.95 - 1.20
0:12
4.5
0.10
1:40
11.0
1.10
EN
3
Publicité
