Publicité
Les langues disponibles
Les langues disponibles
• Push the "Convert/Mode
the inserted slide or negative.
• Use the "
Left/Mirror" button (2) or the "Right/
Flip
" button (7) to select the different func-
tions:
Saving the scanned slide/negative
Cancel, return to the preview
Cancel, return to the main menu
• After selecting the desired function, briefly push the "OK/ENTER" button (4) to confirm.
If the memory card (or the internal memory) is full, no new images can be saved and
an error message is displayed. In that case, insert a new, empty memory card into the
slide scanner or transfer the data from the memory card or the internal memory onto
the computer.
• If you have chosen the function for saving and confirmed it, the preview image will appear
again after saving. You can now scan another slide/negative.
e) Formatting the memory card (or internal memory)
Attention!
Formatting will remove all data from the SD/SDHC memory card (or the internal
memory if no memory card is inserted)!
• Push the "
Left/Mirror" button (2) or the "Right/Flip
peatedly until the corresponding submenu has been chosen; see figure on
the right or chapter 10. a).
• Push the "OK/ENTER" button (4) briefly to confirm.
• A safety prompt appears. Select the desired option with the "
"Right/Flip
" button (7), then push the "OK/ENTER" (4) button.
Alternatively, you can push the button "Convert/Mode
then be back in the main menu.
36
" button (6) to scan
" button (7) briefly re-
Left/Mirror" button (2) or the
" (6) to cancel; the slide scanner will
Publicité
