Renkforce DS100-8M Mode D'emploi page 28

• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Association for Electrical Systems and Operating Materials
are to be observed.
• If you have questions which remain unanswered by these operating instructions,
please contact us or another expert.
b) Mains adapter/mains voltage
• The mains adapter is constructed pursuant to protection class II. Only a proper
mains socket must be used as voltage source for the mains adapter.
• The mains socket to which the mains adapter is connected must be easily ac-
cessible.
• Do not pull the mains adapter from the mains socket by pulling the cable.
• If the mains adapter is damaged, do not touch it. Danger to life from electric
shock!
First switch off the mains voltage for the mains socket to which the mains adap-
ter is connected (switch off the circuit breaker or turn out the fuse, then switch
off the FI protection switch so that the mains socket is separated from the mains
voltage on all poles).
Then unplug the mains adapter from the mains socket. Dispose of the damaged
mains adapter in an environmentally compatible way. Do not use it anymore.
Replace it by a mains adapter of the same specifications.
c) Operation
• The product is not a toy. Devices that are operated with mains voltage have no
place in the hands of children. Therefore, be particularly careful when children
are present.
Operate the product in a way that it is out of reach of children.
• The product must only be set up and operated in dry, closed inner rooms; it must
not become damp or wet. Never touch it with your moist or wet hands! There is
danger to life from electric shock due to the plug-in mains adapter!
• The product must not be exposed to extreme temperatures, direct sunlight, in-
tense vibration or heavy mechanical strain. Protect it from dust and dirt.
28