Publicité
Les langues disponibles
Les langues disponibles
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
1.
Insert the blender bar on the motor unit until it locks.
2.
Immerse the blade guard completely in the ingredients. Then press the
switch ( I ) or switch ( II ).
3.
Move the appliance slowly up and down and in circles to blend the
ingredient.
4.
Unplug and then remove blender bar after use.
5.
You can use the hand blender in the measuring beaker and just as well
in any other vessel.
Important:
Short-time operating. Use the appliance for no longer than 1
minutes and leave it cool down for at least 1 minute before using again.
Cleaning
Risk of electric shock!
Before you clean the hand blender, unplug the appliance from the power
socket. Under no circumstances may the motor unit be cleaned by immersing it
in water or holding it under running water.
Clean the motor unit, the hand blender, with a moist cloth.
After processing very salty food, you should rinse the blades right away.
Ensure that water cannot permeate through the openings of the hand
mixer. For stubborn soiling use a mild detergent on the cloth.
Clean the rest of the attachment components under running water and dry
them off well with a dish towel.
Technical Data
Model No
HB-11B.014A
Voltage
AC 220-240V
Frequency
50/60Hz
Power
Max. 1100W
Instructions for use
Protection against electric
shock
Continuous working time
Intermission time
English
Class II
≦1 min
≧1 min
3
Publicité
