Human Touch HT-3100 Mode D'emploi Et D'entretien page 5

take a seat
When changing backrest or foot and calf massager direction, there is a slight pause while the chair gears
shift. This is perfectly normal.
To collapse the chair for moving, press down on the backrest release lever, located on the back of the
chair under the rear right-hand corner of the seat, then push the backrest down onto the chair seat.
humantouch.com
1. Power on
Plug the power cord into a grounded power
source. Turn the master power switch (on the
bottom center of the backrest) to On.
2. Adjust the footrest height
While sitting in the chair, pull up on the footrest
control lever (located on the right-hand side of the
chair) to allow the footrest to rise to a comfortable
height. Release the lever.
3. Adjust the backrest
Use the remote control Recline and
Incline settings to adjust the backrest
angle for maximum comfort.
6
Using your Human Touch massage chair
a seat and adjust the backrest and foot and calf massager
to the desired position. Your Human Touch massage chair
helps you feel better from head to toe, using a wide variety
of massage techniques that you control. It's the perfect
way to relax and refresh.
FOR A FOOT OR CALF MASSAGE
1. Deploy the foot and calf massager
Pull up on the footrest rotation release handle (located on the right-hand
side of the footrest).
For a calf massage, rotate the footrest away from the chair until it clicks
into position with the foot and calf massager facing up. Do not force the
rotation of the footrest past the point at which it clicks to lock. Excess
force may damage the mechanism.
For a foot massage, rotate the footrest away from the chair just until the
foot and calf massager is facing up. Do not rotate it so far that it clicks
into position; the footrest should be moving freely for a foot massage.
2. Insert your feet or calves
Do not stand or sit on the foot and calf massager.
For an easier exit, retract the footrest and restore the backrest to a full upright position
before getting out of the chair.
Make sure the area behind/underneath the footrest is clear of any obstructions before retracting the footrest.
Use the footrest lever to retract the footrest. Use the Power Incline button
full upright position.
is easy. Just take
to return the backrest to a
7