Publicité
Les langues disponibles
Les langues disponibles
Controls
width of the picture. Use left/Right Menu to center the image on the screen. If
the H.Size is wrongly calibrated, the result would look like on the left drawing.
The image should be homogeneous.
Wrong
FINE (Analog input only)
Improves focus, clarity and image stability by increasing or decreasing this setting.
Should the "Auto Adjust function" and the "H.Size" function do not give you a
satisfactory picture setting, a fine tuning can be performed using the "Fine"
function. It improves focus, clarity and image stability by increasing or decreas-
ing this setting.
For this a Moiré test pattern could be used. If the Fine value is wrongly
calibrated, the result would look like on the left drawing. The image should be
homogeneous.
AccuColor
®
Control Systems
AccuColor
(sRGB and NATIVE color presets are standard and cannot be changed). Color
temperature increases or decreases, in each preset. R,Y,G,C,B,M,S: Increases
or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation
depending upon which is selected. The change in color will appear on screen
and the direction (increase or decrease) will be shown by the color bars.
NATIVE: Original color presented by the LCD panel that is unadjustable.
Tools 1
SHARPNESS: This function is digitally capable to keep crisp image at any timings.
It is continuously adjustable to get distinct image or soft one as you prefer, and set
independently by different timings.
The number of adjustment steps is different depending on whether EXPANSION
Mode is OFF, FULL or ASPECT (1600 x 1200 is OFF Mode).
EXPANSION MODE: Sets the zoom method.
FULL: The image is expanded to 1600 x 1200, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
LCD2080UXimanual_053105.pmd
–continued
Wrong
Control Systems: Six color presets select the desired color setting
®
9
9
Correct
Correct
6/2/05, 2:51 PM
Publicité
