Bosch PWS 13-125 CE Notice Originale page 25

OBJ_BUCH-972-001.book Page 26 Monday, April 20, 2009 11:13 AM
26 | English
Intended Use
The machine is intended for cutting, roughing,
and brushing metal and stone materials without
using water.
For cutting metal, a special protection guard for
cutting (accessory) must be used.
For cutting stone, a special extraction hood for
cutting with cutting guide (accessory) must be
used.
With approved sanding tools, the machine can
be used for sanding with sanding discs.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Release lever for protection guard
2 Spindle lock button
3 Thumbwheel for speed preselection
4 On/Off switch
5 Auxiliary handle
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Reduced starting current
Constant electronic control
Speed preselection
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
1 609 929 S67 | (20.4.09)
6 Grinder spindle
7 Extraction hood for sanding*
8 Mounting flange with O-ring
9 Carbide grinding head*
10 Clamping nut
11 Quick-clamping nut
12 Protection guard for grinding
13 Protection guard for cutting*
14 Grinding/cutting disc*
15 Hand guard*
16 Rubber sanding plate*
17 Sanding sheet*
18 Round nut*
19 Cup brush*
20 Cutting guide with dust extraction protec-
tion guard *
21 Diamond cutting disc*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
PWS 10-125 CE
3 603 C47 0..
W 1020
W 560
-1
min 11000
-1
min 2800 – 11000
mm 125
M 14
mm 22
kg 1.6
/II
*
PWS 13-125 CE
3 603 C48 0..
1300
740
11000
2800 – 11000
125
M 14
22
1.8
/II
Bosch Power Tools