Télécharger Imprimer la page

Bort BSS-900-R Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

Geräusch-/Vibrationsinformation
Gemessen gemäß EN 60745-2-11 beträgt der Schalldruck-
pegel dieses Gerätes 89 dB(A) und der Schalleistungspegel
101,1 dB(A) (Standard- abweichung: 3 dB), und die Vibrati-
on 7,9 m/s
(Hand-Arm Methode) .
2
Konformitätserklärung
Wir erklären in alleiniger Verantwortung, daß dieses
Produkt mit den folgenden Normen oder normativen
Dokumenten übereinstimmt: EN 60745-1, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3, gemäß den Be-
stimmungen der Richtlinien 2006/42/EG, 2006/95/EG,
2004/108/EG, 2011/65/EU .
English
Air blower
Intended Use
The product is indented for blowing leaves, garden waste
such as grass, twigs and pine needles .
Technical specifications (fig. 1)
Product elements (fig. 2)
1 . On/Off switch with speed control
2 . Switch locking button
3 . Wheel for adjusting speed
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions .
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury .
Save all warnings and instructions for future reference .
The term "power tool" in the warnings refers to your main-
soperated (corded) power tool or battery-operated (cord-
less) power tool .
Work area safety
• Keep work area clean and well lit . Cluttered or dark areas
invite accidents .
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust . Power tools create sparks which may ignite the dust
or fumes .
• Keep children and bystanders away while operating a
power tool . Distractions can cause you to lose control .
Electrical safety
• Power tool plugs must match the outlet . Never modify
the plug in any way . Do not use any adapter plugs with
earthed (grounded) power tools . Unmodified plugs and
matching outlets will reduce risk of electric shock .
• Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators . There is
an increased risk of electric shock if your body is earthed
or grounded .
• Do not expose power tools to rain or wet conditions . Wa-
ter entering a power tool will increase the risk of electric
shock .
• Do not abuse the cord . Never use the cord for carrying,
pulling or unplugging the power tool . Keep cord away
from heat, oil, sharp edges and moving parts . Damaged
or entangled cords increase the risk of electric shock .
• When operating a power tool outdoors, use an extension
cord suitable for outdoor use . Use of a cord suitable for
outdoor use reduces the risk of electric shock .
• If operating a power tool in a damp location is unavoida-
ble, use a residual current device (RCD) protected supply .
Use of an RCD reduces the risk of electric shock .
Personal safety
• Stay alert, watch what you are doing and use common
sense when operating a power tool . Do not use a power
5

Publicité

loading

Ce manuel est également adapté pour:

93410815