Publicité
Les langues disponibles
Les langues disponibles
31
Slide the spring-loaded lock pad in the direction indicated by arrow 1 and lift
the utility card compartment cover as indicated by arrow 2. The figure at right
shows the inside of the utility card compartment.
4)
Remove the connector cover from the memory card and place the card in the
compartment so that its connector pins come in contact with the connector
pins inside the compartment.
5)
Replace the utility card compartment cover.
61
Set the sliding switch on the bottom panel to ON.
Note:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~-
1 nstalling the memory card in the reverse direction may destroy the contents of the
X-07's memory. Do not touch the connector contacts.
2
Publicité
