Publicité
▪
Insert the washer and screws into the two slots on the inside of the door. Please note the
washer must be inside the slot and screws pass trough the door frame.
▪
Align the handle with the screws and tighten using a head screwdriver until the handle is
flush against the door frame. Do not over-tighten as this will cause damage to the handle
assembly and stainless-steel door surface.
▪
Carefully press the door seal back into its original position
Note: Your appliance is equipped with a door holder to optimize its closing and sealing; make
sure the door is properly installed on the holder. You must push the door to be able to pass
the door support.
32
Publicité
