Publicité
▪ Proper air circulation is necessary to avoid overheating. To ensure
sufficient ventilation, observe the installation recommendations
Provided.
▪ In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor,
recommendations.
▪ The appliance should not be placed close to radiators or cooking
hot plates or gas
▪ Check that electrical sockets remain accessible when the
appliance is installed.
▪
When positioning the appliance, ensure the supply cord is
not trapped or damaged.
▪ Votre appareil n'est pas conçu pour être placé dans un
garage, sous-sol ou autre lieu du même type.
Power saving
To limit the electricity consumption of your appliance:
▪ Install it in an appropriate place (see "Installing your appliance").
▪ Leave the doors open as little time as possible.
▪ To ensure that the appliance operates properly, clean the
condenser regularly (see "Routine servicing of your appliance").
▪ Regularly inspect the door seals and ensure that they are still
closing properly. If this is not the case, contact your after-sales
service.
Layout recommendations:
The
following
appliance's equipment (shelves, etc.)
is recommended so that energy is
used as rationally as possible for the
appliance.
Designed temperature of wine cooler
is 12°C, it is recommended to set the
temperature at 12 ° C for optimized
preservation of wine.
condenser).
rings.
layout
of
your
Observe
the
25
installation
Publicité
