Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE RECEIVER
1.2.1 User Mode
Select Driving Mode:
You have an option to choose the positioner's movement
type: Continuous, Step or Time.
Position the antenna with north, south, east and west and
use the
/
/
/
key to drive motor.
key drives to east,
key drives to north and
to south.
If you finished driving of motor, select "Store current Position."
and press OK key, to reset new driving motor.
N N o o t t e e
:
The level indicated in the "Signal Status" is only for reference.
The signal quality may be adequate even though the level indicated is not maximum.
Go to Stored Position.
When the stored position is reached then screen displays "Stop",
you can now continue with the further operations.
Select the Calculate Sat Positions to recalculate the satellite position and OK key.
1.2.2 Installer Mode
After checking the positioner's state, installer should use this menu.
He should set the "Disable Limits" before using User mode.
Select the Drive Motor West/East and use the
to drive motor.
key drives to west and
key drives to east.
Select "Enable Limit", in order to enable "Set Limit".
Select "Disable Limit", in order to disable "Set Limit".
Select "Reset Positioner" and OK key to reset positioner.
GB-18
key drives to west,
key drives
/
keys
D
I
G
I
T
A
L
1.3 Solarsat Setting
This menu is only for the Solarsat antenna.
When you press this menu, you will get this message,
"This menu is only for the Solarsat antenna.
If you have one-press OK, otherwise-press EXIT."
You can set the value according to your location.
To set the Value of Date and Time, use the PG+/PG- keys
to change the value.
Use the
/
keys to change position.
Use the
/
keys to move each filed.
1.4 Auto Scanning
The sub menu "Auto Scanning" will enable download the
channels automatically from the preprogrammed satellites.
To download channels automatically:
You can select All/Off/Only Free option mode with the the
/
keys in each satellite, which can be displayed more by
the PG+/PG- keys .
Off :
No Scan
All :
Scan all the channels
Only Free : Scan free channels
Press OK key.
Auto Scanning menu will be displayed.
All the channels in the list from the selected satellite will be
automatically downloaded.
After scanning you will see "Your digital receiver found...".
Then, you should press OK key to store all channels into STB.
S
A
T
E
L
L
I
T
E
R
E
C
OPERATING THE RECEIVER
E
I
V
E
R
GB-19
Publicité
