Panasonic GP-VD151A Mode D'emploi page 22

Setting the menu items
w Picture 1/2 screen
w
Pi ct ur e 1/ 2
Ch roma L ev el
AW B Mo de
R Gai n
B Gai n
De tail
Fl esh To ne M od e
DN R
Re turn
Chroma Level [–3 to +3]
Set here is the color intensity (chroma level) of the
images.
AWB Mode [ATW, AWB A, AWB B]
The white balance mode is selected here.
Select the mode when the coloring is not natural because
of the nature of the light source or other factors.
If the white color serving as the reference can be
recognized, subjects can be shot with natural coloring.
ATW: In this mode, the white balance is compensated
for automatically, even if changes occur in the
light source or color temperature, by a process of
continuous and automatic adjustment.
AWB A, AWB B:
When AWB A or AWB B is selected and the
white balance is executed, the adjustment results
obtained are stored in the memory selected.
When AWB A or AWB B is then selected, the white
balance stored in the selected memory can be
recalled.
R Gain B Gain [–30 to +30]
,
When "AWB A" or "AWB B" has been selected as the
AWB Mode setting, the white balance can be finely
adjusted upon completion of the automatic white balance
(AWB) adjustment.
Detail [Off, Low, High]
The image detail (image sharpness) is adjusted here.
When "Low" or "High" is selected, the detail is enhanced.
Flesh Tone Mode [Off, Low, High]
Set here is the flesh tone mode for displaying the
subjects' skin so that it appears more smoothly and
eye-pleasingly.
When "Low" or "High" is selected, the effect is enhanced
even more.
DNR [Off, Low, High]
- 1
AW B A
0
0
Lo w
Of f
H ig h
Return
21 (E)
Set here is the level of the digital noise reduction effect so
that light, noise-free and clear images will be output even
at night and in other low-brightness environments.
When "Low" or "High" is selected, even more noise can
be eliminated.
However, there is an increased possibility that
afterimages may occur.
Use this to return to the previous menu.
Notes
w p When the automatic white balance (AWB) adjustment is
performed, the R Gain and B Gain values return to "0".
w p When "AWB A" or "AWB B" has been selected as the
AWB Mode setting, the R Gain and B Gain adjustment
values can be stored in the two memories (A and B).
w p When new values are set, the previous data is deleted.
Use one memory for one set of shooting conditions and
the other memory for another set of shooting conditions.
w p In registering data in the preset memories, the R Gain
and B Gain settings (-30 to +30) are not stored, but the
white balance (color) statuses that are established after
adjustments have been made using R Gain and B Gain
can be stored.
w p If Mode A has been selected as the Preset Scope
setting, the R Gain and B Gain settings will return to "0"
when the data in the preset memories is recalled.
w p When ATW has been selected as the AWB Mode
setting, R Gain and B Gain cannot be adjusted.