Publicité
Les langues disponibles
Les langues disponibles
WINDSHIELD MOUNT ANTENNA INSTALLATION
6
A-PILLAR TRIM PANEL REMOVAL
1. Using a panel removal tool, carefully remove the driver's side
dashboard tweeter cover by lifting upward.
(FIGURE H)
2. Remove the driver's side A pillar trim panel. (FIGURE I)
(1) Pull the upper part of the trim panel - A pillar towards the center
of the vehicle.
(2) Insert long-nose pliers into the top part of the trim, grip the tether
clip with the pliers and twist 90
CAUTION: Be careful not to damage the pillar trim surface
and curtain airbag module when inserting the pliers.
(3) Holding the tether clip twisted as in the previous step, remove
the A pillar trim panel from the tether clip.
(4) Remove the clips, and remove the A pillar trim panel.
3. Inspect the white protective (non-woven fabric) of the curtain airbag.
If the fabric is damaged, the curtain airbag assembly must be replaced.
FIGURE I
PART NUMBER
ISSUE
H001SFJ600
0
in that position.
2
3
DATE
01
30 Sep 2013
1
SUBARU OF AMERICA
FIGURE H
4 OF 12
Publicité
