GM ULTIUM POWERUP+ Manuel De L'utilisateur page 8

3. Reattach the Ultium PowerUP+ Charge Station on
the wall mount using the previously removed screws
from Step 1.
If a padlock has been purchased, secure the unit by
locking the padlock on the security nut.
3.1.2 MOUNTING THE CABLE WALL MOUNT
1. Unscrew the two screws at the bottom to access the
mounting plate, keep the screws.
3. Reattach the cable wall mount on the mounting
bracket using the previously removed screws (see
step 1).
Date
ALL INFORMATION WITHIN ABOVE
BORDER TO BE PRINTED EXACTLY
31MAR23
AS SHOWN ON 8.5 x 11 WHITE 16
05APR23
POUND NON-BOND RECYCLABLE
PAPER. PRINT ON BOTH SIDES,
EXCLUDING TEMPLATES. TO BE
UNITED IN ACCORDANCE WITH
GMCCA SPECIFICATIONS.
Revision
First Rel
Second Rel
2. Mount the mounting bracket to the intended surface,
using the screws provided (where applicable).
Note: a drilling template is provided to assist
installation.
PART No.
R 05APR23
Auth DR
Title
SAR MB
SAR MB
PART No.
5642869 SHEET
+
SHEET
EN
User Manual
8