Publicité
Les langues disponibles
Les langues disponibles
3.1
WALL-MOUNTING INSTRUCTIONS
The included screws are for convenience and can only be used on wooden surfaces. They can also be used on concrete if
used with concrete-wall anchors.
IMPORTANT INFORMATION:
!
CAUTION:
Make sure a surface that is appropriate for the weight of the Ultium PowerUP+ Charge Station is chosen and
that the correct screws are used for the intended surface and that the unit is safely mounted on the wall before using the unit.
If there is uncertanty of which surface is appropriate or which screws are suitable for the application, contact a specialist to
seek advice.
This device shall be mounted at a sufficient height from ground such that the height of the storage
means for the coupling device is located between 24 inches (600mm) and 4 feet (1.2m) from ground.
NOTE: for indoor use, 24 inches (600mm) can be changed to 18 inches (460mm).
Installing a padlock is recommend to prevent theft. Padlock not included.
3.1.1
MOUNTING THE ULTIUM POWERUP+ CHARGE
STATION
1. Unscrew the four screws including the security nut
(highlighted) to access the charge station wall
mount, keep the screws (see step 3).
Date
ALL INFORMATION WITHIN ABOVE
BORDER TO BE PRINTED EXACTLY
31MAR23
AS SHOWN ON 8.5 x 11 WHITE 16
05APR23
POUND NON-BOND RECYCLABLE
PAPER. PRINT ON BOTH SIDES,
EXCLUDING TEMPLATES. TO BE
UNITED IN ACCORDANCE WITH
GMCCA SPECIFICATIONS.
Revision
First Rel
Second Rel
2. Mount the charging station wall mount to the
intended surface, using the screws provided (where
applicable).
Note: a drilling template is provided to assist
installation.
PART No.
R 05APR23
Auth
DR
Title
SAR
MB
SAR
MB
PART No.
5642869
SHEET
+
SHEET
EN
User Manual
7
Publicité
