inventiv 739782 Notice De Montage page 31

6- Precautions for use
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
The machine is intended for hammer drilling and chiseling in concrete, brick. It is also suitable
for drilling without impact in wood, metal, ceramic and plastic.
A1
1
A2
B
2
3
1
2
3
C
ORIGINAL INSTRUCTIONS
2
1
SAFETY AND OPERATING MANUAL
BEFORE PUTTING INTO OPERATION
1. REMOVING & INSTALLING THE BATTERY PACK
(NOT SUPPLIED) (SEE FIG. A1, A2)
Depress the battery pack release button firmly first
and then slide the battery pack out from your tool.
Slide the fully charged battery pack onto the tool with
sufficient force until it clicks into position.
2. INSTALLING THE AUXILIARY HANDLE (SEE FIG. B)
To loosen the auxiliary handle, rotate the handle
clockwise.
Slide the handle onto the hammer and rotate to the
desired working position. To clamp the auxiliary
handle rotates the handle counter-clockwise.
NOTE: This handle should be used at all times to
maintain complete control of the tool.
3. INSTALLING THE DEPTH GAUGE (SEE FIG. C)
Loosen the depth gauge by rotating the handle
clockwise.
Slide the depth gauge until the distance between the
depth gauge end and the drill bit end is equal to the
depth of hole/ screw you wish to make.
Then clamp the depth gauge by rotating the handle
counterclockwise.
31