inventiv 739782 Notice De Montage page 29

5- Presentation of the product / characteristics
TECHNICAL DATA
Type CDH18BD.9 (CDH -designation of machinery, representative of rotary hammer)
Voltage
No load speed
Impact rate
Impact energy
Chuck type
Max. drilling capacity
Machine weight
NOISE INFORMATION
A weighted sound pressure: L
K = 3 dB (A)
pA
A weighted sound power: L
K = 3 dB (A)
wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
Hammer drilling into concrete
Chiseling
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used especially what kind of
workpiece is processed dependant on the following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
ORIGINAL INSTRUCTIONS
Steel
Wood
Concrete
= 82 dB(A)
pA
= 93 dB(A)
wA
29
SAFETY AND OPERATING MANUAL
Vibration emission value a
Uncertainty K = 1.5 m/s²
Vibration emission value a
Uncertainty K = 1.5 m/s²
18V
0-1350 /min
0-4700/min
2.0J
SDS-Plus
13mm
28mm
22mm
1.9kg
2
= 12.67 m/s
h,HD
2
= 9.27 m/s
h,Cheq