Domo DO91135F Mode D'emploi page 47

DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local authorised
service agent to make this conversion or ask a technician. Before you reverse the door, you should ensure
the appliance is unplugged and empty. After reversing the door, leave the appliance alone for 8 hours
before switching it on. This allows the coolant to set.
1
5
1. Top cover
2. Upper hinge
3. Door
4. Lower hinge
5. Feet
6. Handle
· Remove the screws of the top cover and
· Unscrew the upper hinge (2).
· Lift the door (3) and place it on a padded surface to prevent it from being scratched.
· Move the screw covers and the handle (6) from one side of the door to the other.
· Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it
protrudes downwards when the hinge is turned.
· Move the cover caps from one side to the other.
· Remove the hinge pin and bottom hinge (4) by unscrewing the screws. Remove the foot (5) from the
left side.
· Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it
protrudes upwards when the hinge is turned.
www.domo-elektro.be
2
3
6
4
remove the top cover (1).
1
2
4
5
DO91135F
6
3
47