Lumi-O Fantom Guide De L'utilisateur page 29

TROUBLESHOOTING
MY WARRANTY HAS EXPIRED
InnovaSpa/Lumi-O will continue to provide service for your spa even after your warranty has expired via our customer care center at
450-565-5544, extension 226 or by email at spaservice@lumi-o.com.
DRAINAGE FREQUENCY
wipe down the spa.
BLEEDING AIR FROM YOUR SPA
to bleed an air-locked pump:
1. Turn off the GFCI breaker
2. Open the access door to the equipment enclosure.
3. Loosen a pump union until you hear the trapped air escape.
4. Once water drips out in a continuous stream, hand tighten the union until the water stops leaking.
5. Turn on the GFCI breaker.
6. Turn on the pump to make sure that it starts and that there are no leaks.
7. Put the access door back on.
F 1.2 : ;
IGURE PUMP UNION LOOSEN UP TO BLEED AIR
27