Winix HR950 Mode D'emploi page 4

All manuals and user guides at all-guides.com
CONTROLS
Air
Outlet
Vent
Light Sensor
Detects the amount of ambient
light within the environment, to
adjust the brightness of the LED
indicators.
Smart Sensor PlasmaWave® Indicator
Automatically detects Indicates whether
indoor air quality. PlasmaWave® is
enabled or disabled.
Child Lock Indicator
LED light indicates
whether Child Lock mode
is enabled or disabled.
Mode / Fan Speed Button
Every time the Mode button is
pressed, the Mode LED light will
cycle through the settings. (Auto,
Sleep, Low, Medium, High, Turbo)
Child Lock Button
Press and hold for 3 seconds to enable
or disable the Child Lock mode.
English
Check Filter Indicator
LED light indicates when it is
time to change the filter.
Power Button
Turns the unit on or
off.
PlasmaWave® Button
Enables or disables PlasmaWave®.
Reset Button
After replacing a filter, press
the RESET button for at least
5 seconds.
Timer Indicator
If timer has been set, the LED
light Indicates the set time of
operation.
Timer / Air Quality
Button
Press to cycle through and set
desired length of operation (1hr,
4hr, 8hr, [NO TIMER]).
Press and hold for 3 seconds to
enable or disable the Air Quality
light.
HR 950, HR 951
4