POWER SMITH PWLD300T Manuel De L'opérateur page 5

ADJUSTING THE LIGHT DIRECTION
Each of the work light heads can be tilted vertically up to 30° down or 90° up.
To Adjust the Light Direction,
position, and retighten the knob.
SWITCH ACTION
Each of the work light heads has a rocker switch (5) located on the
back.
Press the switch on the left side marked "I" to turn on the work light at
7500 lumens. Press the switch on the right side marked "II" to turn on
the work light at 15,000 lumens. Turn off the work light by setting the
switch in the middle position "O". See FIG 5.
Always turn the work light off before unplugging.
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
Use the similar care for the stand and tripod.
WARNING:
completely cool before attempting to clean it.
This product is warranted free from defects in material and workmanship for 5 (FIve) years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call
the Toll-Free Help Line for possible solutions.
For questions about this or any other PowerSmith™ product,
888-552-8665.
Please call Toll-Free:
www.powersmithproducts.com
Or visit our website:
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
English
OPERATION
loosen the side locking knob (4-FIG 1). Adjust the work light head to the desired
MAINTENANCE
Always make sure the work light is unplugged and
WARRANTY
HELP LINE
5
5
FIG 5