MSW Motor Technics MSW-MHB-360-780 Manuel D'utilisation page 6

V. BEFORE THE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is
kept horizontal and stable. The various items used for packaging (cardboard, plastic straps, polyurethane
foam) should be conserved, so that the machine can be sent back to the service centre in the best condi-
tion in case of any problems!
VI. ASSEMBLING THE MACHINE
MSW-MHB-360-780 / MSW-MHB-450-680:
9 8
7
10
2
5
3
1
4
1. wheels
2. lift foot pedal
3. release foot pedal
4. table release speed adjustment valve [only for MSW-MHB-450-680 model]
5. pump
6. ramp
7. table
8. motorbike attachment U-clamps
9. vice
10. limiter
MSW-MHB-135-PRO / MSW-MHB-150-PRO
5
4
3
6
1
2
10
6
MSW-MHB-135 / MSW-MHB-150
5
4
3
1
2
Rev. 23.03.2020
1. release foot pedal
2. lift foot pedal
3. scissor lift system
4. fasteners
5. table-top
6. locking bar
Before the use, ensure that the motorcycle weight and size do not exceed the lift capacity.
Secure the motorcycle lift against unintentional movement before lifting.
Only use the motorcycle lift on stable and even surfaces.
The lift may only be transported without load and with the table in the lowest position.
Only use the lift on a stable and dry surface, which is not slippery and is of sufficient load capacity for the
lift and its load. Keep the device clean. Do not keep items on the lift which are not essential to perform the
work.
Attach the motorcycle firmly and securely to the table. Use tie-down straps and U-clamps on the lift to do
that.
Before lowering the table, remove all items from under it. Keep at a safe distance from the lift when in
operation.
Do not use the lift or table to transport objects. The lift is designed to be used solely as a stationary device,
for lifting. Make sure the load to be lofted is stable.
All repairs have to be carried out by qualified technical personnel. Use only original replacement parts,
approved by the device manufacturer.
Position the loft on a firm and horizontal surface, with sufficient lead bearing for the weight of the lift and
the load; secure the lift against accidental movements.
Locate the load (motorbike) in the table and secure by clamping the front wheel in the vice [only MSW-
MHB-360-780 / MSW-MHB-450-680 models]. Also use tie-down straps / clamps to attach the motorbike to
the table.
Lift the table by firmly pressing on the lift pedal. Once the table is at the desired height, insert the locking
bar into one of the slots in the table. This secures the table from accidental release or movement:
Once work is complete, make sure there is nothing below the
table preventing the lift from being lowered. Remove the locking
bar and slowly press the release pedal (or knob, depending on the
motorbike lift model). Slowly lower the table.
Rev. 23.03.2020
11