Publicité
Les langues disponibles
Les langues disponibles
Modules (power management)
Operation
4.22 Locking
The lock can be used to lock key operation and cooking
level settings. Only the ON/OFF key can be used to switch
the hob off .
Activating the lock
1. Press the lock key
Lock key will light up.
Switching off the lock
2. Press the lock key
Lock key will light up.
Notes
•
An activated lock will remain activated even if the hob
is switched off . It must therefore be de-activated when
cooking is re-commenced.
•
In the event of a power cut the lock will be cancelled,
i.e. deactivated.
4.23 Power boost
The power boost setting makes additional power available
for induction cooking zones. A large quantity of water can
be brought to the boil very quickly.
1. Switch on the hob.
2. Press the respective sensor fi eld
far right on MAX of the respective cooking zone. The
power setting display shows
now be activated.
3. After 10 minutes the power boost setting will switch off
automatically. The
switch down to 9.
Please note:
Press the respective sensor fi eld
switch off the power boost setting.
4.24 Power management
For technical reasons two cooking zones always comprise
a module and have a maximum power level.
If this power range is exceeded when a higher power
setting level or the power boost function is switched on the
power management system will reduce the power setting
of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after
which the highest-possible power setting will be consis-
tently displayed.
. The control lamp above the
. The control lamp above the
on the
. The power boost will
will go off and the power level will
to prematurely
GB
35
Publicité
