Dometic SabreLink150 Instructions De Montage Et De Service page 11

SabreLink150
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or mainte-
nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
The radio equipment of the device complies with the requirements of the directive
2014/53/EU. You can find the Declaration of Conformity of the device on
documents.dometic.com.
6 Technical description
The lighting system is designed for operation with AC power. Up to three LED lights
can be linked together using one power adapter.
The light source of this light is not replaceable. When the light source reaches its end
of life the whole light shall be replaced.
Control elements
No. in fig. 3,
Description
page 4
1 On/off button
2 + and – buttons
3 Percentage buttons
EN
Technical description
11