Marechal Electric DSN1 Mode D'emploi page 18

►WIRING (2/2)
COLOUR-CODED RINGS
Insert a colour-coded ring between the device and its rear
accessory (handle, angle adapter, etc.).
The two protrusions of the rings must be positioned on the
latch side for the socket-outlet/connector and on the catch
side for the plug/inlet.
This ring acts as a seal.
VOLTAGE STICKERS
If necessary, affix the voltage stickers supplied in a bag to the
locations provided for this purpose on the plug/inlet and on
the socket-outlet cover.
IS 06-2 [DSN] Rev A.1 - 2022-11
18/79 . ,