Télécharger Imprimer la page

Remington iLIGHT IPL6500 Mode D'emploi page 14

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
ENGLISH
• Store the unused attachment in a safe location (such as in the packaging) taking care not to damage
the Flash Window and other components.
• The i-LIGHT is equipped with two operating modes: Single Flash Mode and Multi-Flash Mode.
Your i-LIGHT device will automatically be set to Single Flash Mode each time the device is powered ON.
• Single Flash Mode: The i-LIGHT will flash each time the Flash Button is pressed. This mode is ideal for
precision treatments of the face and small areas.
• Multi-Flash Mode: The i-LIGHT device will flash when the Flash Button is pressed and will continue to
flash every 3 seconds when the skin contact sensors are fully engaged. The Multi-Flash mode allows
you to quickly treat large areas by simply gliding the hand piece over the skin after each flash.
, How to treat:
Place the Flash Window firmly against the skin - ensure the Skin Contact Sensors are fully engaged.
, NOTE: When the Skin Contact Sensors are fully engaged you will hear a 'chirp' and the Bulb Status
Indicator Display will illuminate green.
2 Press the flash button to deliver a flash. You should expect to see a bright flash of light (similar to a
camera flash), and you should feel a mild sensation of warmth.
3 Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.
• For Single-Flash Mode, press the Flash Button each time you move to the next area.
• For Multi-Flash Mode, keep your finger on the Flash Button to keep it depressed and glide to the next
area being sure to keep the Skin Contact Sensors fully engaged. The next flash will be delivered
automatically after 3 seconds.
, NOTE: During Multi-Flash Mode if you let go of the Flash Button or lose skin contact,
simply resume treatment by repeating the above steps.
, Facial Treatment (female use only)
Facial hair can be very different to body hair and the skin on the face tends to be
sensitive and more likely to be exposed to the sun's UV rays; therefore treating
unwanted facial hair is different to treating the body – please be sure to read the
Warnings and Safety Precautions carefully before beginning a facial treatment.
, IMPORTANT: The Facial Attachment has been specially designed to treat the unique
characteristics of female facial hair. DO NOT use the Body Attachment on the face.
See section 'Changing Attachments' for more information.
14
Fig. 10

Publicité

loading