Midwest iCrate CA1524DD Instructions De Montage

Assembly Instructions for Model Numbers CA1524DD, CA1530DD, CA1536DD CA1542DD, CA1548DD
IMPORTANT INFORMATION
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
To prevent possible injury to yourself, remove jewelry such as rings, loose bracelets and necklaces before assembling the crate.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of return or exchange,
failure to return product in similar condition as received could result in limited reimbursement. Please save sales receipt as proof of purchase
for warranty purposes. Check to ensure you have all the parts below. If you discover any parts are missing, immediately call our toll-free
service helpline at 1-800-428-8560 (Monday - Friday 9 a.m. to 4 p.m. EST) or at info@midwesthomes4pets.com.
Parts Identification: Folding Crate, Plastic Pan, Divider Panel, Plastic Carrying Handle(s), 1 or 2 depending on the size of your crate)
ASSEMBLY INSTRUCTIONS
1. Remove the folded crate from the carton. Place it on a flat sur-
face with the plastic pan on the bottom and the wires facing
up. Unhook the locking device located on the side of the crate.
2.
While keeping the crate flat on the floor, unfold it like you
would open a book.
3.
Lift up on the top wires to form the top and the sides of the
crate.
4.
The bottoms of the two side panels should rest inside the bot-
tom panel frame. One edge of the top panel should set inside
the side panel while the other edge should rest outside of the
side panel.
5.
Reach in the home and pull the door panel toward you until it
fits into the clips on the ends of each side panel.
800-428-8560
midwesthomes4pets.com
P .O. Box 1031
Muncie, Indiana 47308
Locking Device
Top panel fits
inside & outside
the side panels
Both side panels fit
inside bottom panel
1