Publicité
Les langues disponibles
Les langues disponibles
I Setting the Fan Speed
• Press 4 to select:
FAN
– Low Fan Speed
FAN
– Medium Fan Speed
FAN
– High Fan Speed
AUTO
FAN
–
Automatic Fan Speed
The speed of the indoor fan is adjusted
automatically according to the operation.
The indoor fan stops occasionally during
cooling operation.
I Setting the Vertical Airflow Direction
• Press 5 to select:
AUTO
•
Swing up/down automatically.
AUTO
All manuals and user guides at all-guides.com
I Setting the Horizontal Airflow Direction
• Press 6 to select:-
Horizontal
Airflow
Direction
Remote
Indoor
Control
Unit
AUTO
•
Swing left/right automatically.
AUTO
G Notes
•
If the unit is not going to be used for an extended
period of time, turn off the main power supply. If it is
left at the ON position, approximately 2.5 W of
electricity will be used even if the indoor unit has
been turned off with the remote control.
•
If operation is stopped, then restarted immediately,
the unit will resume operation after 3 minutes.
G Operation Details
COOL – Cooling Operation
•
To set the room temperature at your preferred cooling
comfort.
AUTO – Automatic Operation
•
Sense indoor temperature to select the optimum
mode.
•
Temperature is not displayed on the remote control
during AUTO operation.
DRY – Soft Dry Operation
•
A very gentle Cooling Operation, prior to
dehumidification. It does not lower the room
temperature.
•
During Soft Dry operation, the indoor fan operates at
Low fan speed.
FAN – Air Circulation Operation
•
When the room temperature reaches the set
temperature, operation commences at Low airflow
volume. It stops when the room temperature drops to
2°C below the set temperature.
(It is useful when using a heater).
6
Publicité
