Publicité
I
I
POWER SUPPLY
Using on batteries +
To insert the batteries
1 Open the lid of the battery compartment.
2 Insert eight R14 (size C) batteries.
Insert them with the 0 and O marks correctly aligned.
3
Close the lid.
Make sure that the FUNCTION
switch is set to POWER OFF/TAPE
before inserting
batteries.
Before using on batteries,
disconnect
the AC cord from the AC inlet.
Battery power is cut off automatically
when the cord is connected.
No batteries
are supplied
with this unit.
Replacing
batteries
The batteries
need to be replaced" when
the OPE/BATT
indicator
becomes dim, the tape speed slows down, volume decreases,
or sound
is distorted
during operation.
Note on the batteries
Do not mix different types of batteries,
or old batteries with new ones.
When you are not going to use the unit fora long period of time, remove
the batteries
to prevent possible electrolyte
leakage.
Never charge the batteries,
apply heat to them, or take them apart to
prevent the risk of electrolyte
leakage or explosions.
Using on AC house current
Connect the supplied
AC cord.
@) to the AC inlet of the unit
@to a wall outlet
CAUTION
The AC inlet of this set may be connected
only with the attached
AC
power cord or one recommended
by AIWA CO., LTD. Use with others
may result in the risk of fire or damage
of AC inlet.
8
Publicité
