Power and Sound Controls continued
Attenuator
*
Press ATT to decrease volume to about 1/10 of the previous level.
e Press ATT again to cancel.
Changing Audio Modes
Press SEL to switch the audio mode in the following order.
Normal Mode
*
vO
ME
-
BASS
=
TREBLE
-
SANE
L.———————
SUB-N
e
FADER
+
Bass and Treble
* Press SEL to select the BASS (TREBLE) mode.
Press "VOL^" or
"V VOL" to increase or decrease the bass (treble) response.
JAS+
dd
TRE- 3d3
|
|
-12 to +12
-12
to +12
4
*
Press "VOL^" or "v VOL" for more than a half second to change
numeric levels on the display rapidly.
Balance
*
Press SEL to select the BALANCE
mode.
Press "VOL^" or
"v VOL" to shift the sound volume to the right or left speakers.
1 to 15
1 to 15
Balance Center
*
Press "VOLA" or ^v VOL" for more than a half second to change
numeric levels on the display rapidly.
Fader
*
Press SEL to select the FADER mode.
Press "VOLA" or ^" VOL"
to shift the sound volume to the front or rear speakers.
1 to 15
Fader Center
1to 15
* Press "VOLA" or ^v VOL" for more than a half second to change
numeric levels on the display rapidly.
Note: When an Audio control mode (BAS/TRE/BAL/FAD/SUB) is selected but no operation is made
within 5 seconds(2 seconds at VOL mode), the display will return to the normal operation mode.
In
such a case, press SEL again to select the control mode.
8
CO-DP975/DFX85EUC