Publicité
Les langues disponibles
Les langues disponibles
(J Installation Procedures
1. Secure the Mounting Collar CD.
Insert Mounting Collar (D into the car's dashboard, and bend mounting tabs out with a screwdriver.
Mounting Tab
ae
EL
~~
© Mounting Coller
aro
-
qo
e.----
Make sure that the lock
lever is flush with the
mounting collar (not
projecting outward).
Dashboard
©
Screwdriver
2. Secure the rear of the unit
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt ©, using a suitable wrench.
C) Insert the unit into Mounting Collar @ and push it in unit "click" is heard.
dd
(9 Mounting Bolt
d) Secure the rear of the unit to the car by either of the two recommended methods.
E Using the Rear Support Strap ©
|
Affix one end of the Rear Support Strap ® to the rear of the unit, and the other end to the Fire Wall of
Car, or some other metallic area.
Bl Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt © on the rear of the unit with Rubber Cushion (Optional), and mount it into the
existing Rear Support Bracket.
& Tapping Screw
3mm
(existing on the car)
\
Rubber Cushion (Optional)
Es
e
CQ-DP975/DFX85EUC
23
Publicité
