Maytag Commercial MHN31PDAWW Instructions D'installation page 11

CODE
REGULAR CYCLE PRICE (Factory Default)
6 07
6 07 Represents the number of quarters (coin 1);
may adjust from 0-39. (See VALUE OF COIN 1.)
Advance from 0-39 by pressing the PERM PRESS
button. Factory default of 7 quarters = $1.75.
6 00
PR MODELS ONLY: Factory default of 0 quarters.
6 01 setting would represent one coin slide
actuation.
g Press the WOOLENS button once to advance to
next code.
WASH LENGTH
7 11
7 11 This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes.
Choose from 9-17 minutes by pressing the PERM
PRESS button.
Press the WOOLENS button once to advance to
g
next code.
ADDITIONAL RINSE OPTION
8 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
8 00 Not Selected 'OFF'.
8 Ar Selected 'ON'. Cannot be combined with the
Super Cycle rinse option.
Press the DELICATES AND KNITS button once for
this selection.
g Press the WOOLENS button once to advance to
next code.
9 00 CYCLE COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9 00 Not Selected 'OFF'.
9 0C Selected 'ON' and not able to be deselected.
Press the DELICATES AND KNITS button 3
consecutive times to select 'ON'. Once selected
'ON' it cannot be deselected.
Press the WOOLENS button once to advance to
g
next code.
1. 00 MONEY COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1. 00 Not Selected 'OFF'.
1. 0C Selected 'ON'.
Press the DELICATES AND KNITS button
3 consecutive times to select 'ON' and 3
consecutive times to remove (Not Selected 'OFF'.)
Counter resets by going from 'OFF' to 'ON'.
1 C0 Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
first select 'ON', then within 2 seconds, press
.
the DELICATES AND KNITS twice, PERM PRESS
once, and exit the set-up mode.
g Press the WOOLENS button once to advance to
next code.
2. 00 SPECIAL PRICING OPTIONS
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
2. 00 Not Selected 'OFF', and next available code will
be A.00.
2. SP Selected 'ON'. Press the DELICATES AND KNITS
button once for this selection.
EXPLANATION
CODE
If SPECIAL PRICING OPTION is selected, there is access
to codes '3.XX' through '9.XX'.
Press the WOOLENS button once to advance to
g
next code.
Options to use if SPECIAL PRICING is selected:
3. 07 SPECIAL CYCLE PRICE
3. 07 Represents the number of quarters (coin 1); may
adjust from 0-39. (See VALUE OF COIN 1.)
Advance from 0-39 by pressing the PERM PRESS
button. Factory default of 7 quarters = $1.75
3. 00
PR MODELS ONLY: Factory default of 0 quarters.
g
Press the WOOLENS button once to advance to
next code.
5. 00 TIME-OF-DAY CLOCK, MINUTES
5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0-59 minutes by pressing the PERM
PRESS button.
Press the WOOLENS button once to advance to
g
next code.
TIME-OF-DAY CLOCK, HOURS
6. 00
NOTE: Uses MILITARY TIME or 24 hr. clock
6. 00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0-23 hours by pressing the PERM PRESS
button.
Press the WOOLENS button once to advance to
g
next code.
SPECIAL PRICE START HOUR
7. 00
NOTE: Uses MILITARY TIME or 24 hr. clock
7. 00 This is the start hour; 0-23 hours. Select START
HOUR by pressing the PERM PRESS button.
g Press the WOOLENS button once to advance to
next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses MILITARY TIME or 24 hr. clock
8. 00 This is the stop hour; 0-23 hours. Select STOP
HOUR by pressing the PERM. PRESS button.
Press the WOOLENS button once
g
to advance to next code.
SPECIAL PRICE DAY
9. 10
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that
particular day (9.10). A number followed by an 'S'
indicates selected for that day (9.1S). To change
the value of '0' and 'S', use the DELICATES AND
KNITS button.
Days of the week (1-7) are selected by pressing
the PERM PRESS button.
When exiting set-up code '9', the display must
show current day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
g Press the WOOLENS button once to advance to
next code.
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
11