Télécharger Imprimer la page

MESTIC SPA-5000 Mode D'emploi page 21

Masquer les pouces Voir aussi pour SPA-5000:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
ENGLISH
7. Operation manual
Open the air outlet
Turn the air outlet upwards manually so that it is fully opened (see picture).
Air outlet
Air outlet
Activate air conditioning
Plug it into the socket. If you hear a short beep and see that the control panel lights up and goes off immediately, it means
that the machine is activated.
To turn on
Press the "ON / OFF button to turn on the machine. If you hear two short beeps and the temperature is digitally displayed on
the air conditioner, the air conditioner is switched on. When the air conditioner is switched on, the temperature is set to 22 °
C by default. The lights of "(M) medium wind speed" and "air conditioning" light up and the fan of the indoor unit turns on.
The temperature sensor measures the ambient temperature and if it exceeds 22 ° C, the outdoor unit starts to work to bring
the temperature down. Is the ambient temperature already below 22 ° C? Then the outdoor unit does not start.
Wind speed
When the "SPEED" is pressed, the machine may emit a short beep. This button allows you to set the indoor unit fan to "(L)
Low wind speed", "(M) Medium wind speed" or "(H) High wind speed". The corresponding lights indicate which setting is
selected.
Switching between A/C mode and fan mode
You can switch from A/C to fan mode by pushing the "MODE" button. The light next to "Fan" will switch on and the light
next to "A/C" will switch off. The compressor and fan of the outside unit will switch off. Only the fan of the inside unit will stay
on. This way, you can enjoy a refreshing breeze, without the cooling function. You can switch back to A/C mode by pushing
the "MODE" button again.
Set the temperature
When you press the "UP" button, the machine will emit a short beep. The temperature is increased by 1°C each time. The
highest possible temperature setting is 30°C. When you press the "DOWN" button, the machine will emit a short beep. The
temperature is decreased by 1°C each time. The lowest possible temperature setting is 16°C.
Sleep mode
Press the "SLEEP" button to activate the sleep mode. After 6 seconds, all lights and the digital display turn off and the air
conditioner goes to sleep. The indoor unit fan continues to run at low (L) wind speed. This way you will not be bothered by
light and sound, and you can sleep peacefully. When you press any button on the control panel, the machine beeps briefly
and returns to its original operating mode.
WI-FI connection
Insert the plug of the air conditioner into the power socket: the air conditioner is in standby mode, all touch buttons will light
up. The Wi-Fi connection indicator light is flashing slowly for about 10 seconds (it is searching for the Wi-Fi). When the device
is connecting to the Wi-Fi, the light is flashing quickly (3x per second). After the Wi-Fi connection is complete, the Wi-Fi light
will be on without flashing, indicating that the Wi-Fi is connected properly.
To make a new Wi-Fi connection, press the fan button for 3 seconds until you hear a 'beep' to exit the Wi-Fi mode. Press the
fan button again for 3 seconds, until you hear a 'beep', to start the Wi-Fi mode again.
Follow the steps under 'Connecting the device to the app' to connect the device to your phone.
Switch off
Press the "ON / OFF" button to turn off the air conditioner. The machine beeps long and all lights turn off. The machine
stops working and goes into standby mode until the machine is switched on again.

Publicité

loading

Produits Connexes pour MESTIC SPA-5000