probst UMG-60/150 Instructions D'emploi page 28

General
2 General
2.1 Authorized use
The device (UMG) is specially designed for gripping of steel pallets (with suitable dimensions) and loading
them into the magazine of the manhole manufacturing machine.
Take care that the carrying capacity /working load limit (WLL) of the device (UMG) is not exceeded.
ATTENTION: The use of this device is only permitted in proximity to the ground (→ chapter "Safety at
work").
NOT ALLOWED ACTIVITIES:
Unauthorized alterations of the device and the use of any self-made additional equipment could cause
danger and are therefore forbidden!
Never exceed the carrying capacity/working load limit (WLL) and the nominal width/nominal size of the
device.
All unauthorized transportations with the device are not allowed:
•
Transportation of people and animals.
•
Transportation of other loads and materials than described in this manual.
•
Never suspend any goods with ropes, chains or similar at the device.
•
The device is only designed for the use specified in this documentation.
•
Every other use is not authorized and is forbidden!
•
All relevant safety regulations, corresponding legal regulations, especially regulations of the declaration
of conformity, and additional local health and safety regulations must be observed.
Prior to every operation the user must ensure that:
•
The equipment is suited to the intended operation
•
the functioning and the working condition of the equipment is examined
•
the load is suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
57200050 4 / 18 GB