Publicité
Les langues disponibles
Les langues disponibles
Problem
"ADD WATER"
indicator turns on
"ICE FULL" indicator
lights up
"ADD WATER" and
"ICE FULL" indicators
turn on simultaneously
The ice collects
together.
Possible causes
1.Low water level or lack of
water
2.The water screen at the bottom
of water reservoir is blocked.
3.Pump malfunction.
1.Ice basket is full and the
infrared light is blocked by the
ice.
2. Infrared light-emitting diode
& light-receiving diode do not
work
1. The ice tray is not in the right
position.
2. The "ICE FULL" condition
can not be detected as the
infrared light module is
interfered by the sunlight.
Making ice takes too much time.
The water in the water reservoir
1.Stop making ice, refill
water and then press
"ON/OFF" key to restart
ice-making cycle.
2.Clean
3.Send it to the authorized
department for repair.
1. Remove the ice from ice
basket.
2a. Wipe up the foreign
objects on the infrared
light-emitting diode &
light-receiving diode and
restart the ice maker.
2b. Call Customer Service if
the infrared light-emitting
diode & light-receiving
diode still can not work
after wiping up the foreign
objects on them and
restarting the ice maker.
1. Unplug the appliance and
check if the ice tray is
blocked by something.
2. Unplug the appliance and
move it to a place which is
not exposed to the sunlight,
then plug the appliance and
activate it again.
Stop making ice and restart
the ice-making cycle after
the ice melts.
Fill the water reservoir with
9
Solution
Publicité
