PNI CT25PW Manuel Utilisateur page 3

Introduction
PNI CT25PW is a programmable built-in thermostat for
underfloor heating with water, which turns the heating
system on and off depending on the set temperature. You
can set different temperatures for different time periods
and days.
The thermostat can work and display the temperature in 3
ways:
- according to the floor sensor
- according to the built-in air sensor
- according to both sensors
How quickly the air in the room heats up does not depend
on the settings of the thermostat, but on the size and the
design of the heating system.
The thermostat has a non-energized relay output that sends
an On/Off command to the boiler or other water heating
systems.
3