Duracraft DT-623E Mode D'emploi page 5

CLEANING
1. Before commencing with cleaning of the fan, ensure
that the operating switch (11) is on OFF (0). Remove the
plug from the socket.
2. Use a clean, damp cloth to clean the exterior of the fan.
Do not use petroleum spirit, thinners or any other
chemicals. Use a vacuum cleaner with brush attachment to
clean the grids.
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes responsibility for the correct use and care of this KAZ product according
to these user instructions. The purchaser must himself or herself decide when and for how long this KAZ product is in use.
WARNING: IF PROBLEMS ARISE WITH THIS KAZ PRODUCT, PLEASE OBSERVE THE INSTRUCTIONS IN THE GUARANTEE
CONDITIONS. DO NOT ATTEMPT TO OPEN OR REPAIR THIS KAZ PRODUCT YOURSELF, AS THIS COULD LEAD TO
TERMINATION OF THE GUARANTEE AND CAUSE DAMAGE TO PERSONS AND PROPERTY.
Technical specifications subject to change.
3. Do not immerse the fan in water! Ensure that no water
gets into the motor casing.
4. The fan can now be used as described under
"Operating instructions".
5
ENGLISH